Buy Oregon Scientific RM313PNA Self-Setting Projection Clock Now
This clock is not the most perfect alarm clock ever made but it fits the bill for what I was looking for. I'm not a morning person and an alarm clock is a serious purchase for me. Twenty two years ago, I bought a tiny battery operated clock in a garage sale for 15 cents. No, I'm not kidding. I loved it the beep was just right, it was small and portable and I only had to change the battery every 5 years or so. It was impossible to read at night, but for 15 cents, it served me well until I dropped it one too many times and made the snooze function unusable.I'm old and cranky I need a good snooze button! I like to sleep in near complete darkness, so at first, the red glow of the numbers on my ceiling made me aware of an ominous glow above me but just like the moon and stars, you kinda adapt to the subtle ambient lighting. In the dead of night, as I roll over in bed, I can look up at my ceiling to see the time without waking all the way or assaulting my eyes.
When the alarm goes off, it a simple beep not beeps one single beep that is loud enough to wake you, but not so loud it startles you. It will be followed by other single solitary beeps about 3-4 seconds apart. I can always slap the snooze button before the second beep comes along. The snooze is just the right time interval for me 8 minutes. I can actually get another few minutes of true sleep before waking fully.
If the alarm goes off when it is still dark outside and it's dark in your room, the glowing blue of the clock might startle you as it is bright. Plugged in, the red numbers are available at all times. When running solely on the 9v battery, the red light is only available when pressing the snooze bar to illuminate the time on the face. You get both when you hit the snooze you can't have just the red numbers. When set to alarm mode, however, I see the red numbers, but the eye-assaulting blue screen is off.
It is very easy to set the alarm. There are not 50 menus to jump through. A single button press on the center button either enables the alarm or disables it. The atomic clock feature means that I'm always on time when it's time to rise. The rubber coated 'feet' of the clock keeps it from sliding across my night stand as I fumble for it when it goes off.
Less than perfect rating is for a few things:
1.) you can't disable the bright blue backlighting or even dim it if you press the snooze bar for a status in the middle of the night (why isn't this also red?!)
2.) I would have liked to have seen this in a metal case something more hearty and sturdy
3.) I can find no way to turn off the 'confirmation beeps' as I reset the alarm and there is no 'fast forward' so if I wake up at 5:30 and decide I'd rather wake up at 6:45, I'm having to hit the 'up' button 15 times to go from 30 to 45 each time with a corresponding beep which is not soft ... meaning if your husband or wife is trying to sleep good luck in trying to reset the alarm without being sent to divorce court.
Overall, I am very pleased with this purchase and I appreciate the thought that went into its design.
Read Best Reviews of Oregon Scientific RM313PNA Self-Setting Projection Clock Here
Overall I am happy with this purchase. For the price this clock is a great buy, and it serves my needs well.*** When I was looking for an alarm clock, I knew that two features were must-haves on my list:
1. Auto synchronization via the atomic cock signal.
2. Ceiling projection.
---Auto synchronization via the atomic cock signal.
I already have a watch that synchs to the atomic clock, and I love this feature. Eventually all clocks in my house (and on my person) will be auto synch (either via atomic clock or cell phone carrier). In my opinion it is the only way to go if you want to be assured of accurate time keeping.
Note that some alarm clocks are advertised as "Automatic Time Set" (for example Sony ICF-C218 Automatic Time Set Clock Radio (Black)), but these do not automatically synchronize their time setting. They call themselves "Automatic Time Set" but all this means is that they come pre-set from the factory with the correct time and have a daylight saving auto-adjustment.
--Ceiling projection.
I had never had a ceiling projection clock before. I was concerned that the projections would be too bright and would interfere with my sleep. This fear was unfounded. The projection of this clock is easily read in a darkened room, yet does not give off appreciable light itself. The projection is red, and looks much like an LED display.
Unfortunately and predictably, in a fully lit room you will not see the projections.
*** Other features of this clock that I like:
--Progressive Alarm
The alarm starts out as a single beep, and then progresses into multiple and more frequent beeps. The volume also seems to increase (but I am not sure of this). I find that I usually wake up in the early single-beep stages, but I am secure that if I am in an especially heavy sleep that the progression of the alarm will serve its purpose and wake me up.
--Position of the snooze button
It is big and on top of the clock.
--Small form factor
It does not take up too much space.
--Temperature display
A nice bonus.
*** Features of this clock I do not like, or are missing:
--No alarm volume control, and no choice of alarm.
The alarm sound is what it is (see above) and there is no changing it
--Position of the alarm button
The button used to cancel the alarm in the morning is on the front of the unit. The good news is it is raised higher than the other buttons making it easier to find. The bad news is that located on the front of the unit it is awkward to hit (especially in a groggy state). Since the clock itself is so light, you have to grab the clock and hold it in order to hit the cancel-alarm button. This button really belongs somewhere on the top of the unit.
--Clock face display only illuminates on request
You cannot read the clock face in the dark without first hitting the backlight button. Much better would have been an always-on LED display.
--No aiming feature on the projector
The projector is fixed relative to the clock. To move the orientation of the projected time, one must move the clock. Said fixed orientation of the projection relative to the clock seems odd to me: If you have the clock on a nightstand with the display facing you, then the projection on the ceiling will be sideways relative to your point of view. Similarly, if the projection is moved so you can read it, then the clock display is no longer facing you.
Want Oregon Scientific RM313PNA Self-Setting Projection Clock Discount?
I got this clock to replace the last one, which was almost identical.Some great things:
1. It projects on the cieling I can't live without this anymore.
2. It's atomic, but you can set everything manually.
3. Battery operated, so it doesn't go off if power goes out, but plugs in so you never have to change the batteries.
4. It's very compact and the housing is very durable.
Less good -
1. Sometimes the radio signal takes a while to catch on, with the blinds shut and everything may just be my area though
2. Last one died (after 3 years use) it would reset it self every time you hit snooze. It had problems after a while.
0 comments:
Post a Comment